DIY Body Shop Tool Bondo Double Locking Suction Cup Dent Puller

Bondo Locking Suction Cup Dent Puller

This is an easy DIY way to pop out large, shallow dents from smooth metal surfaces, and avoid the Body Shop. The tool has two handles that create a strong vacuum, up to 300 times stronger than non-locking cups. This makes it great for car body panels.------

                      Step-by-Step Instructions

Clean the Surface: Wash the dented area thoroughly with soap and water to remove dirt, wax, or debris. The cleaner the surface, the better the vacuum seal will be.

1. Prep for Suction: To help the suction cup stick, lightly wet the rubber cup or the car surface with water, soapy water, or a glass cleaner like Windex.
2. Position the Tool: Make sure both handles are open or released before you start.
3. • For small dents, center the cup over the dent.
   • Large Dents: Begin at the edges of the dent and move toward the center, working in steps.
4. Lock and Pull:
5. • Press the cup firmly against the panel.
   • Squeeze the two handles together until they lock in place.
   • Pull the tool out with steady, even pressure until the dent pops back into place.
6. Release: When you’re done, open the handles to break the vacuum and remove the tool.

Tips for Success

1. Temperature Is Important: Metal bends more easily when it’s warm. Try to work when the temperature is between 60°F and 80°F. If it’s colder, you can use a hair dryer or pour hot water on the area to help soften the metal.
2. Watch Out For Creases: Suction pullers work best on wide, shallow dents without sharp creases or damaged paint.
3. Progressive Pulling: For very large dents, you might need to use the tool several times in different spots around the dent to get the panel back to normal.

This tool is available for purchase in our eBay store — brand new, fast shipping. 

Bondo Locking Suction Cup Dent Puller

The Bondo Locking Suction Cup Dent Puller lets you quickly and easily remove large dents from your car’s body panels and avoid the Body Shop. You can handle the repair yourself in just a few minutes, without drilling, filling, sanding, or repainting. 

This compact tool is simple to use and locks in place, creating much stronger suction than standard suction-cup dent pullers. * Attach it to your car or truck panel and pull out dents in just minutes. * The double handle design makes locking and pulling easy and effective. 

* With its double-handle locking action, this tool creates 300 times more suction than a non-locking suction-cup dent puller. * Its compact, lightweight size saves space and makes it easy to store and carry. * It’s a much less expensive and time-consuming alternative to full body work. * This small, lightweight tool features a 4-inch rubber suction cup that attaches firmly to your vehicle. * It’s simple, practical, and economical. * Dents pop out in seconds. * Easy to use.

This tool is available for purchase in our eBay store — brand new, fast shipping.